Якісні запчастини до мотоциклу Yamaha

• 12 Volt and 6 Volt
• Lead acid, AGM and Gel batteries
• Quick mode change button on front face
• 1 Amp
• Battery Range 1.3-60Ah
• Cable Length 1m (To quick connect plug), 1.1m (Including clamps/eyelet cable)
• Trickle charger
• Quick release plug with cover
• Wall plug compact design
• Weight 0.58Kg

• 12 Volt and 6 Volt
• Lead acid, AGM, Gel and Lithium batteries
• Quick mode change button on front face
• 2 Amp
• Battery Range 1.3-60Ah
• Cable Length 1m (To quick connect plug), 1.1m (Including clamps/eyelet cable)
• Trickle charger
• Quick release plug with cover
• Wall plug compact design
• Weight 0.58Kg

Single bolt as supplied by Yamaha
Does not include collar for levers.

Measurements: Length 305mm, Top 10x46mm, Bottom F.30x12mm.
YSS offers a full 2 year warranty on all shock absorbers.
Non stock item will usually arrive in around 10 working days.

Set contains 2 pins and 2 R clips

Set contains 2 pins and 2 R clips

Kit For Single Caliper Contains:

• 2 wiper seals
• 2 dust seals
• 2 caliper joint seals
• 2 stainless steel bleed nipples
• 2 bleed nipple covers
• 2 copper washers
• 1 sachet of red rubber grease

Kit For Twin Caliper Contains:

• 8 wiper seals
• 8 dust seals
• 4 caliper joint seals
• 2 stainless steel bleed nipples
• 2 bleed nipple covers
• 4 copper washers
• 1 sachet of red rubber grease
• * Does not include Blue Star Caps

This Kit Contains:

• 2 stainless steel pistons
• 2 wiper seals
• 2 dust seals
• 2 caliper joint seals
• 2 stainless steel bleed nipples
• 2 bleed nipple covers
• 2 copper washers
• 1 sachet of red rubber grease

Kit Contains:

• 8 stainless steel pistons
• 8 wiper seals
• 8 dust seals
• 4 caliper joint seals
• 2 stainless steel bleed nipples
• 2 bleed nipple covers
• 4 copper washers
• 1 sachet of red rubber grease
• * Does not include Blue Star Caps

High Corrosion Resistance
- Yellow Zinc Plated
8mm 1.25

For Hoses requiring special fittings the banjos can only be supplied in silver.
Made to order, usually 24 hours to manufacture

For Hoses requiring special fittings the banjos can only be supplied in silver.
Made to order, usually 24 hours to manufacture
Three lines in a Kit
Supplied with black heat shrink over the end of the hose

This is the Yamaha OEM nut and washer kit 90891-10124-00,
the up-rated kit for earlier bikes with the troublesome thinner nut.

Kit Contains:
1 Nut - 90179-18006 (Thread 18x100)
1 Washer (90215-21290)

Automatic Chain Lubrication System for Motorcycles.
Eliminates chain cleaning, suits all types of chain including O ring.
Can be used for on and off road and gives between 2 to 7 times chain life.
Only suitable for motorcycles with a vacuum take-off point.
Motorcycles which don't have this feature will need to be fitted with the E-System instead.

White Lubricant.
Fully synthetic clear formula has absolute resistance against fling-off and is completely waterproof.
Compatible with o-rings, x-rings and z-rings.

219FTH-PL.
About 2.54mm Diameter Pins
Warning : DID do not recommend the cutting and Riveting of Cam Chain at home
as incorrect fitment could result in engine seizure and resulting injury.

For Hoses requiring special fittings the banjos can only be supplied in silver.
Made to order, please allow an additional 3-4 days.

Complete Piston Assembly with Carburettor Piston and Diaphragm.

**** PLEASE READ THE INSTRUCTIONS FIRST *****
520 Chain to 530 Chain soft rivet link only,
old rivet heads need to be ground off
with an angle grinder before they can be extracted.

96mm OD In/Outlet 9mm as Kawasaki 49019-1055 Yamaha 1FK-24560-00