Тут ви бачите Замок пружинний до безсальникового ланцюга DID Super Heavy Duty. У нашому інтернет-магазині ви також знайдете тисячі інших високоякісних запчастин за привабливими цінами.
A clip-type connecting link with a light press-fit construction which gives higher fatigue strength than a slip-fit link while still retaining much of the convenience. It requires more pressure to fit than a slip-fit link, but can still be fitted with a pair of pliers as opposed to special riveting tools required for a rivet link.
No spring link can attain the strength of a rivet link and the FJ spring link has approximately 65% strength of the other links in the chain. However where a rivet link is not feasible then a press-fit link may be used.
DID highly recommends that where possible, a rivet link should be used for any sealed (O-Ring or X-Ring) chains.
Press-fit side plates must be pressed on with long-handled, adjustable pliers. Do not attempt to hammer the side plate into position: this can cause stress to the connecting link and cause it to break while in use.
Усі ціни вказано у фунтах стерлінгів (GBP) та включають ПДВ за ставкою 20%, якщо необхідно. ПДВ буде виключено з вартості при оформленні замовлення за межі Європейського Союзу.
Загалом: £ 0.00
(у т.ч. ПДВ). Вартість доставки розраховується під час оформлення замовлення.